Detailed Guide to Resolve D-Link WiFi Router Red Light Issue
Many users have reported that they are facing the D-Link router red light issue. Is the LED light on your D-Link wireless router also blinking red? Well, that might be because of a number of reasons: technical glitches, outdated firmware, loose cable connections, weak Ethernet connection, too much distance between WiFi devices, improper power supply, etc. However, we don’t care about what might be the reason behind the D-Link router red light issue because we are here to assist you anyway. In this post, you will find some hacks that will surely help stop the LED on your device from blinking red. Thus, scroll down and read on.
Fixed: D-Link Router Red Light Issue
Fix 1: Reboot Your D-Link Router
As mentioned earlier, technical glitches are one of the many reasons why the LED on your D-Link router is flashing red. To cast aside these glitches, you need to reboot your D-Link wireless router. Here is how to do that:
- Turn off your D-Link router and unplug it from its wall socket.
- Wait for some time.
- Plug your dlinkrouter back into its wall socket and power it on.
Now, have a look at the LED light on your router. Are you still struggling with the D Link router red light issue? Yes? Follow the next troubleshooting hack.
Fix 2: Verify the Ethernet Connection
Check the Ethernet cable connecting your D-Link wireless router and the existing modem. If it is worn out or damaged, it is recommended that you get it replaced with a new one immediately.
In case doing so doesn’t bear any fruit, consider opting for a wireless medium to create a connection between your devices.
Fix 3: Pull Your Devices Closer
Too much distance between your D-Link wireless router and the existing modem can make it difficult for them to communicate effectively.
Therefore, unplug your router from the wall socket it is currently plugged into and plug it into the one located near the existing modem. In order words, place both your wireless devices in close proximity.
Fix 4: Perform D-Link Firmware Update
If you haven’t updated the firmware of your D-Link wireless router yet, waste no more time getting down to the process.
Here is how you can perform D-Link router firmware update:
- Switch on your computer.
- Open an internet browser according to your preference.
- Download the latest firmware for your D-Link router.
- Open a new tab in your internet browser.
- Type dlinkrouter.local in the address field of the internet browser.
Note: If you come across the dlinkrouter.local not working issue while logging in to your D-Link router, contact our well-versed technical experts.
- Press the Enter key.
- You will be prompted to fill in the default username and password.
- Thus, enter the login credentials and click the Login button.
- Once logged in, click Manual Setup.
- Select the Maintenance tab and click the Firmware Update button.
- Click Browse.
- Once the file has been located, click Open > Upload.
In some time, the firmware of your router will get updated to the latest version.
Fix 5: Check the Power Supply
Have a look at the wall socket to which your D-Link wireless router is connected. If it is damaged from anywhere, get it repaired immediately. If this option doesn’t work in your favor, then consider plugging your router into a different wall socket.
Fix 6: Reset Your D-Link Router
Did none of the aforementioned troubleshooting hacks help you resolve the D-Link router red light issue? Well, in that case, your last resort is to reset your router.
Here is how you can restore your router to the factory default settings:
- Locate the Reset button on your D-Link wireless router.
- Get hold of a pointy object and press the Reset button with its help.
- Wait for a couple of seconds.
Once you are done resetting your D-Link WiFi router, reconfigure it from scratch.
Wrapping Up
Coming across the D-Link router red light issue is very common, but, resolving it is not. If you are still seeing the LED on your wireless device blink red, don’t hesitate to reach out to our technical experts.